|
1) The
wide end "W" should extend about 12 inches below narrow
end "N". Cross wide end "W" over narrow end "N".
|
|
2)
Bring wide end "W" up through loop between collar and
tie; then back down.
|
|
3)
Pull wide end "W" underneath narrow end "N" and to the
left, back through the loop and to the left again so
that the wide end "W" is inside out.
|
|
4)
Bring wide end "W" across the front from left to right.
|
|
5)
Pull wide end "W" up through the loop again.
|
|
6)
Bring wide end "W" down through the knot in front.
|
|
7)
Using both hands, tighten the knot carefully and draw up
to collar.
|
